Such a rubber doll clearly has its advantages: lifelike, tight and horny. She never wants you to pay the bill after dinner.
She doesn’t complain about your porn consumption, the bag of chips and the many beers. And she never has migraines either. In short: A dream for every man.
But can you imagine Build your own pocket pussy? How exactly does a masturbator “brand homemade” work and so can a construction compete with a commercial rubber dummy?
That and even more you will learn in today’s article, because I have tested it for you and give you at least 2 building instructions for your pocket pussy on the way. In the end, I also take a look at male rubber dolls for women.
By the wayl would probably never have written this article because I prefer professional masturbators, the demand was so big that I finally had to bow to the pressure.
Why make a rubber doll yourself?
We all know that a homemade rubber doll has nothing to do with a real woman and her vagina, but the idea of a rubber pussy alone awakens the male spirit of research. After all, we all know the stories about the hack and the thermos flask.
That’s got to work out better!
Our homemade rubber dolls have nothing in common with food (Mummy’s apple pie is much too tasty and a pity for that) – but they are still quite appetizing.
First to the base of every rubber doll: The homemade rubber pussy.
Pocket pussy building instruction no. 1: The easy way
That’s what you need:
- a tea towel.
- disposable gloves.
- 1 large sock.
- much lubricant.
Step 1
The first thing we need to make your own pocket pussy is the tea towel.
Take it and spread it out in front of you. Fold it two or three times.
The more often you fold the towel, the tighter your handkerchief will be at the end.
Step 2
The towel is now double or triple folded.
Next, place the disposable glove on one of the ends of the towel. It is important that the glove opening protrudes slightly beyond the edge of the folded towel.
Because now we roll the glove firmly into the towel, so that only the opening of the glove looks out at the top.
At the end a tightly rolled up package comes out.
Now you can test with one finger how tight your pocket pussy feels. If it’s too tight for you, you have to take the construction apart again and fold the towel less once.
If it’s too loose, you can fold the towel one more time.
Step 3
Now you put a sock over the rolled up towel – on the side where the fingers of the glove are.
If the sock holds the towel once, you can pull the opening of the glove over the sock.
Step 4
Lube it. Have fun: Your pocket pussy is ready!
With one of the simplest variants to build a masturbator yourself.
You can marvel at the towel variant here in moving pictures:
An alternative to socks is by the way bubble wrap, which you also wrap in the towel (with the pimples inwards).
This makes it a little more attractive, because the pressure on your penis is uneven.
Professional alternatives from Fleshlight. Pocket pussy building instruction no. 2: rubber loop 2.0
Another way to build your pussy is a bit more complicated, but also much more satisfying.
You need:
- a tennis ball tube.
- thick dishwasher gloves.
- a pack of XL condoms.
- some rubber bands.
- a diaper (we only need the “filling” of the diaper, so don’t worry, hehe).
- scissors.
- a glass of water.
- one Edding.
- Water-based lubricant.
Step 1
Open the tennis ball tube and empty it. If there’s a banderole, remove it. All we need is the tube itself.
Use the scissors to make a small hole in the lower side of the tube so that no negative pressure is created later. This is very important, as otherwise the negative pressure will ensure that my pulling out of your best piece will keep up with the whole inner workings of the masturbator. And that’s not what we want.
Step 2
Open a condom and roll it out completely. Fill the inside with a little lubricant. Take a second condom and stuff it into the already rolled out condom – an Edding helps enormously here.
The lubricant in the first condom will reduce friction and improve the feeling at the end, followed by a little more lubricant and another condom.
This way you stack about five to six condoms with lubricant together. The more condoms you use, the tighter the rubber mussel becomes.
So maybe not exactly buy the best Durex or Lelo condoms for it.
Step 3
Take the diaper and cut it carefully. We only want to have the inner part that can absorb water.
Now cut off the fingertips of the two rubber gloves. Plug one glove into the other. The Edding is here again your best friend.
The contents of the diaper are wrapped around the two gloves.
Do not lubricate the opening of the gloves completely. We need them for something else.
Step 4
Put the gloves in the tennis tube. Now it’s getting wet!
Now slowly fill the tennis ball tube with the glass of water. Don’t panic, the diaper filling will absorb everything.
The material will expand and become quite heavy.
Finally we put the opening of the gloves over the edge of the tennis ball tube and fix it with 3-4 rubber bands.
Step 5
Now the condoms come into the opening of the gloves. The upper end with the opening is put over the tennis ball tube again and fixed with further rubber bands. And already the more sophisticated rubber pussy is ready for use.
Since the whole thing as a pure text in theory is not so super to understand, just take a look at this great video on it.
Although there are others Items from the supermarket (chip tin, disposable gloves, sponges, lubricant/food oil/baby oil, hair bands), but in principle it is almost identical.. If not even easier and better to implement.
There are, by the way, numerous other pocket pussy construction manuals on the Internet.
Pocket pussy building instruction no. 3: nice alternative
A nice alternative consisting of several sponges, a simple glass and a condom can be found here. By the way, Gianna’s extremely pretty to look at!
You also need simple household sponges, an (XL-)condom, a glass and something to lubricate it with. I’ll summarize the whole thing again very slowly with pictures together.
Step 1
Moisten the sponges with water and add some lubricant (e.g. lubricant) to the condom.
Step 2
Now you clamp the condom between the sponges and push everything together into the glass. The smaller the glass is, the higher the pressure on your best piece later on.
Step 3
The front end of the condom is simply put over the glass and fastened with adhesive tape.
Step 4
Lube in and out of the mail!
You don’t care about the order, you can also insert the condom first, tighten it and then put the lubricant into it; it could even work better. The best way to do this is with an XL condom, because a normal one can tear over the glass when you put it on.
If you don’t have a condom at hand, you can use a disposable glove if necessary (see last photo). But the rubber feels a little better in my opinion.
Unfortunately, you can’t make an air hole here to counteract the excessive negative pressure. You could pierce a hole in the condom, but then there’s a danger of it tearing.
Something similar works of course with plastic bottles and can be marvelled at in the following video or on this side.
By the way, you can also find nice, great illustrated instructions on the subject in the Joyclub. Bonus: You can even download the variant with the chip box as a PDF here.
If you want to see more creative ideas and know what you can do with a pool noodle, a toilet block and a mirror, have a look here.
You are also welcome to try the variant with curd soap.
You simply drill a hole in the middle of the curd soap and take it with you into the shower. I don’t want to go into too much detail.
Just this much: It comes quite close to the feeling of a blow job.
For the sake of completeness I should mention that there is one variant with bags and books and one with balloons.
By the way, you can see from the number of clicks on the Youtube videos wiiiiie the topic is in demand (especially among teenagers). I would never have thought so.
If you ask me what’s best for me, I can tell you straight: The variant with the chip box from the above video. Especially in combination with the hair rubbers, this makes a real difference.
Closely followed by the pussy in the glass. Whereby there is no air hole and the complications can entail.
How’s the cleaning coming?
Well, with the self-creations mentioned above you only have to remove the filled condom, throw it away and insert a new one.
So I’d say, it is less complex than e.g. cleaning a Fleshlight. Because you have to remove the inner sleeve, clean it completely, turn it to the left and let it dry completely in the air until you can use it again with a clear conscience.
Lifelike rubber doll: Just a dream?
Nice. Now we have two different possibilities to build a pussy by ourselves – but a real rubber doll is not that yet.
The complete body is missing. But you can also build it yourself.
There are a few different methods.
Simplest
Take some clothes like shirt, sweater and trousers, fill them with old fabrics or other old clothes; make them look as real as possible. Done in no time.
More elaborate
Take sturdy plastic bags, arrange them body-shaped and fill them with air. With a cold air hair dryer you save a lot of work here.
With this variant you only have to make sure that the bags are airtight and not too full.
Then you tie your rubber pussy to the lower part of your sex doll – done!
Airy
Fill a large balloon to about one third with the gel and then fill it up with water. This creates a gel-like substance that gives way slightly under pressure. Now you make a halfway lifelike rubber doll out of the filled balloons and place your rubber eyelet anatomically correct.
Lifelike
This is really VERY complex, but feasible.
You’ll need latex, plastic granules and a lot of time and craftsmanship.
But you can also customize the doll with acrylic paint and creativity according to your wishes.
If you can make a rubber doll lifelike, you can build just about anything that makes sex more fun.
And if that’s not enough. Well, then you have to put a lot of money in your hand to get a rubber doll that is as realistic as possible. And unfortunately I’m talking about several thousand Euros.
By the way, you hear more and more about rubber dolls for men. The demand is increasing, especially in the Far East.
I have even seen reports on this in Galileo on Pro7.
Homemade rubber doll for women
Look out, ladies! Of course you don’t have to go out empty-handed either. With a little creativity, you can also easily create male rubber dolls.
This is particularly easy with a condom that you fill with latex gel or silicone, but there are different materials available. A slim dildo or another, slightly flexible, phallus-shaped object can serve as a stable base.
Alternatively there are also Dildo-Set’s, with which you can pour yourselves a Dildo, from the form of a male member.
The same methods can be used for the body as for the other inflatable rubber dolls.
Or you simply trust in the variety of good sex toys for women, which I would definitely advise rather – whereby such a rubber doll is naturally male without end.
Conclusion ‘Build your own pocket pussy’: craftsmanship for real men.
Your rubber doll for the man can be as basic or as fancy as you want it to be.
And don’t worry. You’re not a freak just because you find the topic exciting, because building a pocket pussy yourself can be a lot of fun – not only solo sex, but also handicrafts.
If the current masturbator market doesn’t give you what you want or your finances don’t make it, you have to make your own pocket pussy.
I hope I was able to help you with this article.
But I’m sure that sooner or later the homemade pocket pussy won’t be enough for you any more. Then you’ll want a “real” professional masturbator.
When it’s time, just have a look at our mastubator comparison or our mastubator bestsellers.
A Tenga Egg, for example, does not even cost 6 €, but can unfortunately only be used once. And the cheapest Fleshlight is also quite affordable.
Let me know in the comments whether you have implemented my tips and how they felt – I am very curious! And now have fun doing handicrafts.
Best regards, Henning
Latest posts by Alex Lesley (see all)
Contents
- 1 Why make a rubber doll yourself?
- 2 Pocket pussy building instruction no. 1: The easy way
- 3 Professional alternatives from Fleshlight. Pocket pussy building instruction no. 2: rubber loop 2.0
- 4 Pocket pussy building instruction no. 3: nice alternative
- 5 How’s the cleaning coming?
- 6 Lifelike rubber doll: Just a dream?
- 7 Homemade rubber doll for women
- 8 Conclusion ‘Build your own pocket pussy’: craftsmanship for real men.
https://www.einarstrayorchestra.com.